www.cynergy3.com ? 2018 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. iso 9001 certified cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset 21 7 bh pe SC-ISOSLICE-6 2018 telephone +44 (0) 1202 897969 email:sales@cynergy3.com made in the uk SC-ISOSLICE-6 isolated bus i/o module 4 off digital outputs multiple inputs in one module very high accuracy, low cost led indication of relay status communicates to ethernet / rs232 or rs485 network via an sc-e-100 unit input/output/power supply isolation automatic bus & power connection via din rail bus connector the SC-ISOSLICE-6 isolated bus i/o module combines full three-port isolation with access to an industrial bus. this bus connects to the sc-e-100 modules which are then used to transmit the process values via either an ethernet or a rs232/485 wired communications network. full 3-port isolation is standard. the digital output action can be switched using internal dip switches for either no or nc operation. the led indicators can be switched to be on or off when the relays are energised. each output is controlled via modbus commands to the sc-e-100 or can be set as alarm levels for analogue input modules. the unit is fitted with spdt relays with all three connections being available for each relay. the units have a wide ranging 12 to 36 vdc. this supply can either be wired to the appropriate terminals or picked up automatically from the bus connector. output types for SC-ISOSLICE-6 digital outputs x 4 the action of each digital output can be selected using internal dip switches between normally energised and normally de-energised. the same applies to the led indication where the leds can be set to be lit when the relay is energised or de-energised. the relays fitted are spdt mechanical relays. technical specifications parameter min typ max comments supply voltage 12v 24v 36vdc supply current (ma) 45 90 for 24vdc supply (260ma for 50ms on start-up) bus connection 16-bit bus connection relay rating 3a@240vac time constant (10-90%) 200ms operating ambient 0oc 55oc relative humidity 0% 90% isolation voltage 1kv see note surge voltage 2.5kv for 50s transient of 10kv/s notes absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. device is protected against reverse polarity connection. accuracy figures based on 24vdc supply, 4-20ma output with 250 load and an ambient 20oc. installation data mounting din rail ts35 orientation any connections screw clamp with pressure plate conductor size 0.5-4.0mm insulation stripping 12mm weight approx 95g ordering information part no.: SC-ISOSLICE-6 part number universal inputs ma or v inputs rtd inputs t/c inputs analogue outputs digital inputs digital outputs sc-isoslice-1 2 sc-isoslice-2 8 sc-isoslice-3 4 sc-isoslice-4 4 sc-isoslice-5 8 SC-ISOSLICE-6 4 sc-isoslice-7 2xfreqin sc-isoslice-8 4 sc-isoslice-9 4 x ac i/v
|
